1.CAN DO STAINLESS STEEL CUTTING TABLE .
2.THE SOFTWARE CAN BE USED IN WINDOWS 7.
3.USE SIEMENS MOTOR.
4.CAN BE WITH ADJUSTABLE WATER LEVEL .
6.CAN DO ACCORDING TO YOUR SIZE REQUESTS.
CANTILEVER TYPE WATERJET CUTTING MACHINE, THE FOLLOWING MACHINE IS
WITH 420MPA INTENSIFIER PUMP, WE CAN ALSO SUPPLY THE MACHINE WITH
380MPA, 300MPA INTENSIFIER PUMP AND 420MPA DIRECT DRIVE PUMP, THE
PRICE WILL BE DIFFERENT!!
A-CNC cutting table
X = Centry beam
Y = Base
The process distance of X axis:
The process distance of Y axis:
The max travel of Z axis :
Max range of process(available cut area):
Speed in X&Y axis:
Speed in Z axis:
1m/min in Z axis
380V/50HZ, can do 220V/415V
±0 .01 mm
± 0.1-± 0.1 mm(depend on the material thickness and cutting speed)
± 0.01 mm
Beam is with disposable extruded aluminum alloy, light weight,
high rigidity, smooth running, free cutting speed is faster .
B-High-pressure intensifier pump
1. The operating pressure can be adjusted manually
at will and the cutting speed can be adjusted at will.
2.Fine three-layer filter system makes higher degree of purity of
the water for cutting: 5μ m/1μ m/0.45μ m, which highly prolong the
service life of all parts of the high-pressure system
3.Over-Pressure Power-off protection for low-pressure system
4. High-pressure safety valve equipped on high-pressure system,
which has self-destruction safety for over pressurization
5.Electronic display and Over-Pressure safety.
6.The hydraulic system is equipped with oil temperature detecting
PD, which will auto alarm when the oil temperature exceeds 60℃
7.Thorough filter system and discretionary security protection
system: double filter of the hydraulic system guarantees safety.
8.The system has multiple alarm and safeguard, which will auto stop
once there comes alarm.
9.The high-pressure pipe lines are solid cone seal, which is good
in sealing and safe and reliable.
10.Dynamic packing is equipped with high-pressure sealing ring made
of imported high-strength nylon, which has service life of 400
Type of pressurization is hydraulic
Max. oil discharge is 90 L/min
Max. water discharge is 3.8L/min
Max. diameter of orifice is 0.33mm
.Maximum pressure 420 MPa(60,000psi)
Continuous operating pressure is 380MPa
Power requirement is 37KW,380V/50HZ ( can do 220V and 415V)
Type of shift is electronic
Intensifier is from America
Accumulator is 1.3L.
Antiwear hydraulic oils 46#(ambient temperature 15-40℃)
C-CNC NUMARICAL CONTROL
19-inch full-color LCD
Support starts, breakpoint continue, handwheel guiding function
Standard WINDOWS 7 operating system
Graphic simulation and analog processing functions
Return function along the original track
Reverse cutting function
Auto division of materials function
Display / Rotate / Mirror Cut
Metric / imperial conversion
Chinese / English online switch
Magnification adjustment function
Cutting gap compensation
Maximum support 2G file
can set the on / off valve sequence and time interval
Corner deceleration function
Professional waterjet cutting software
Suitable file format dxf. nce. nc. cnc. eng. plt. G-code etc.
D-Auto abrasive feeding system
This abrasive feeding system can supply garnet sand automatically
for the machine