1. The operating pressure can be adjusted manually
at will and the cutting speed can be adjusted at will.
2.Fine three-layer filter system makes higher degree of purity of
the water for cutting: 5μ m/1μ m/0.45μ m, which highly prolong the
service life of all parts of the high-pressure system
3.Over-Pressure Power-off protection for low-pressure system
4. High-pressure safety valve equipped on high-pressure system,
which has self-destruction safety for over pressurization
5.Electronic display and Over-Pressure safety.
6.The hydraulic system is equipped with oil temperature detecting
PD, which will auto alarm when the oil temperature exceeds 60℃
7.Thorough filter system and discretionary security protection
system: double filter of the hydraulic system guarantees safety.
8.The system has multiple alarm and safeguard, which will auto stop
once there comes alarm.
9.The high-pressure pipe lines are solid cone seal, which is good
in sealing and safe and reliable.
10.Dynamic packing is equipped with high-pressure sealing ring made
of imported high-strength nylon, which has service life of 400
11. Japan Siemens motor and American ACCUSTREAM intensifier..
Type of pressurization is hydraulic
Max. oil discharge is 90 L/min
Max. water discharge is 3.8L/min
Max. diameter of orifice is 0.33mm
.Maximum pressure 380 MPa(55,000psi)
Continuous operating pressure is 330MPa
Power requirement is 30KW,380V/50HZ ( can do 220V and 415V)
Type of shift is electronic
Intensifier is from America
Accumulator is 1.3L.
Antiwear hydraulic oils 46#(ambient temperature 15-40℃)